Huawei MA5608T
Huawei SmartAX MA5608T GPON OLT, 19 inch, with 2U height 2 service slots, support EPON, GPON, 10G PON, P2P, xDSL and POTS; H801MABR subrack
SKU: MA5608T
Product Description
Tech Specs
| System performance | |
| Backplane bus switching capacity | 720 Gbit/s |
| System L2 packet forwarding rate | MCUD/MCUD1: 190Mpps(Active/Standby mode), 380Mpps(Load-sharing mode) |
| Control board switching capacity | MCUD/MCUD1: 128Gbit/s(Active/Standby mode),256Gbit/s(Load-sharing mode) |
| Switching/Forwarding delay | Short forwarding delay: The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 μs. |
| BER in full load | BER of port when transmitting data in full load < 10 e-7 |
| System performance | |
| System | Redundant configuration |
| System availability in typical configuration | >99.999% |
| Mean Time Between Failures (year) | ≈45 |
| Configuration | |
| Maintenance port | Number of 10 Mbit/s/100 Mbit/s maintenance Ethernet ports: 1 |
| Number of serial ports for local/remote maintenance: 1 | |
| Monitoring port | Number of environment monitoring serial ports: 1 |
| Maximum number of ADSL2+ ports in a subrack | 128 |
| Maximum number of VDSL2 ports in a subrack | 128 |
| Maximum number of EFM SHDSL ports in a subrack | 64 NOTE: The MA5608T only supports the EFM SHDSL ports. |
| Maximum number of TDM SHDSL ports in a subrack | 32 |
| Maximum number of POTS ports in a subrack | 128 |
| Maximum number of ISDN BRA ports in a subrack | 64 |
| Maximum number of ISDN PRA ports in a subrack | 64 |
| Maximum number of GPON ports in a subrack | 32 |
| Maximum number of 10G GPON ports in a subrack | 16 |
| Maximum number of P2P FE ports in a subrack | 96 |
| Maximum number of P2P GE ports in a subrack | 96 |
| Management ports | |
| Outband management Ethernet port (RJ-45) | MCUD/MCUD1 |
| Local serial port (Console) | MCUD/MCUD1 |
| Upstream ports | |
| GE optical port | MCUD1: 2 Ports Board |
| MCUD:4 Ports Board | |
| ETHB/SPUF: 8 Ports Board | |
| 10GE optical port | MCUD1: 2 Ports Board |
| SPUF: 8 Ports Board | |
| E1 port | TOPA: 16 Ports Board |
| STM-1 upstream optical port | TOPA: 2 Ports Board |
| Service ports | |
| GPON port | GPBD/GPBH: 8 Ports Board |
| GPFD: 16 Ports Board | |
| 10G GPON port | XGBC: 4 Ports Board |
| XGBD: 8 Ports Board | |
| P2P GE optical port | OPGD/OPGE: Single-fiber bi-directional: 48 Ports Board, Two-fiber bi-directional: 24 Ports Board |
| P2P FE optical port | OPGD/OPGE: Single-fiber bi-directional: 48 Ports Board, Two-fiber bi-directional: 24 Ports Board |
| Ethernet optical port | ETHB: 8 Ports Board |
| E1 port | H802EDTB: 16 Ports Board |
| ADSL2+ | ADPD/ADPM/ADPE : 64 Ports Board |
| VDSL2 | VDRD : 24 Ports Board |
| VDMF/VCMM : 48 Ports Board | |
| VDPM/VDQM/VDPE/VDPD/VCPE : 64 Ports Board | |
| EFM SHDSL | SHLM : 16 Ports Board |
| SHGM : 32 Ports Board | |
| TDM SHDSL | H802EDTB: 16 Ports Board |
| POTS | ASPB : 64 Ports Board |
| ADSL2+&POTS | CAME : 48 Ports Board |
| VDSL2&POTS | CVME : 48 Ports Board |
| CCPE : 64 Ports Board | |
| ISDN BRA | DSRD/DSRE :32 Ports Board |
| Power parameters | |
| Power supply mode | DC or AC |
| Rated voltage | DC power supply: -48 V / -60 V AC power supply: 110 V / 220 V |
| Working voltage range | DC power supply: -38.4 V to -72 V AC power supply: 100 V to 240 V |
| Maximum input current | DC power supply: 10 A AC power supply: 6 A |
| Working environment temperature | -40°C to +65°C |
| Working environment humidity | 5% RH to 95% RH |
| Atmosphere pressure | 61 kPa to 106 kPa |
| Altitude | < 4000 m |
| Device Specifications | |
| Dimensions (W x D x H, excluding mounting brackets) | 442mm×244.5mm×88.1mm |
| Dimensions (W x D x H, including mounting brackets) | 535mm×244.5mm×88.1mm, for ETSI cabinet NOTE:ETSI standard dimension is to add the ETSI mounting bracket on the IEC mounting bracket. |
| 482.6mm×244.5mm×88.1mm, for IEC cabinet | |
| Weight (empty chassis) | 3.55KG |
.png)
.jpg)
.png)
