Huawei SmartAX MA5608T GPON OLT, 19 inch, with 2U height 2 service slots, support EPON, GPON, 10G PON, P2P, xDSL and POTS; H801MABR subrack
SKU: MA5608T
Tech Specs
System performance | |
Backplane bus switching capacity | 720 Gbit/s |
System L2 packet forwarding rate | MCUD/MCUD1: 190Mpps(Active/Standby mode), 380Mpps(Load-sharing mode) |
Control board switching capacity | MCUD/MCUD1: 128Gbit/s(Active/Standby mode),256Gbit/s(Load-sharing mode) |
Switching/Forwarding delay | Short forwarding delay: The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 μs. |
BER in full load | BER of port when transmitting data in full load < 10 e-7 |
System performance | |
System | Redundant configuration |
System availability in typical configuration | >99.999% |
Mean Time Between Failures (year) | ≈45 |
Configuration | |
Maintenance port | Number of 10 Mbit/s/100 Mbit/s maintenance Ethernet ports: 1 |
Number of serial ports for local/remote maintenance: 1 | |
Monitoring port | Number of environment monitoring serial ports: 1 |
Maximum number of ADSL2+ ports in a subrack | 128 |
Maximum number of VDSL2 ports in a subrack | 128 |
Maximum number of EFM SHDSL ports in a subrack | 64 NOTE: The MA5608T only supports the EFM SHDSL ports. |
Maximum number of TDM SHDSL ports in a subrack | 32 |
Maximum number of POTS ports in a subrack | 128 |
Maximum number of ISDN BRA ports in a subrack | 64 |
Maximum number of ISDN PRA ports in a subrack | 64 |
Maximum number of GPON ports in a subrack | 32 |
Maximum number of 10G GPON ports in a subrack | 16 |
Maximum number of P2P FE ports in a subrack | 96 |
Maximum number of P2P GE ports in a subrack | 96 |
Management ports | |
Outband management Ethernet port (RJ-45) | MCUD/MCUD1 |
Local serial port (Console) | MCUD/MCUD1 |
Upstream ports | |
GE optical port | MCUD1: 2 Ports Board |
MCUD:4 Ports Board | |
ETHB/SPUF: 8 Ports Board | |
10GE optical port | MCUD1: 2 Ports Board |
SPUF: 8 Ports Board | |
E1 port | TOPA: 16 Ports Board |
STM-1 upstream optical port | TOPA: 2 Ports Board |
Service ports | |
GPON port | GPBD/GPBH: 8 Ports Board |
GPFD: 16 Ports Board | |
10G GPON port | XGBC: 4 Ports Board |
XGBD: 8 Ports Board | |
P2P GE optical port | OPGD/OPGE: Single-fiber bi-directional: 48 Ports Board, Two-fiber bi-directional: 24 Ports Board |
P2P FE optical port | OPGD/OPGE: Single-fiber bi-directional: 48 Ports Board, Two-fiber bi-directional: 24 Ports Board |
Ethernet optical port | ETHB: 8 Ports Board |
E1 port | H802EDTB: 16 Ports Board |
ADSL2+ | ADPD/ADPM/ADPE : 64 Ports Board |
VDSL2 | VDRD : 24 Ports Board |
VDMF/VCMM : 48 Ports Board | |
VDPM/VDQM/VDPE/VDPD/VCPE : 64 Ports Board | |
EFM SHDSL | SHLM : 16 Ports Board |
SHGM : 32 Ports Board | |
TDM SHDSL | H802EDTB: 16 Ports Board |
POTS | ASPB : 64 Ports Board |
ADSL2+&POTS | CAME : 48 Ports Board |
VDSL2&POTS | CVME : 48 Ports Board |
CCPE : 64 Ports Board | |
ISDN BRA | DSRD/DSRE :32 Ports Board |
Power parameters | |
Power supply mode | DC or AC |
Rated voltage | DC power supply: -48 V / -60 V AC power supply: 110 V / 220 V |
Working voltage range | DC power supply: -38.4 V to -72 V AC power supply: 100 V to 240 V |
Maximum input current | DC power supply: 10 A AC power supply: 6 A |
Working environment temperature | -40°C to +65°C |
Working environment humidity | 5% RH to 95% RH |
Atmosphere pressure | 61 kPa to 106 kPa |
Altitude | < 4000 m |
Device Specifications | |
Dimensions (W x D x H, excluding mounting brackets) | 442mm×244.5mm×88.1mm |
Dimensions (W x D x H, including mounting brackets) | 535mm×244.5mm×88.1mm, for ETSI cabinet NOTE:ETSI standard dimension is to add the ETSI mounting bracket on the IEC mounting bracket. |
482.6mm×244.5mm×88.1mm, for IEC cabinet | |
Weight (empty chassis) | 3.55KG |